Gas Pressure Washer 6.5HP Max 4800PSI Power Spray Gun 4-Stroke 5 Nozzles

High Pressure Washer, cleaning capacity increased by 50%.
Four-stroke engine, power up to 7HP, high pressure 4800PSI, water flow 2.5GPM.The pump adopts a horizontal shaft.
Compared with ordinary pumps, the service life and cleaning ability are increased by 50%, and it is efficient and stable.
Comes with a 66Ft hose to expand your working range and make your work more convenient.
You have the choice of 4 different colour coded nozzles giving you different spray patterns to choose from:
0°nozzle (Red):This nozzle delivers a pinpoint stream and is extremely powerful. It covers a very smallarea of cleaning. This nozzle should only be used on surface that can withstand this high pressure such asmetal or concrete. Do not use on wood.
15°nozzle (Yellow):This nozzle delivers a powerful 5 degree spray pattern forintense cleaning of small areas.
This nozzle should only be used on areas thatcan withstand the high pressure from this nozzle.
25°nozzle(Green):This nozzle delivers a 25 degree spray pattern for intensecleaning of larger areas.This nozzle should only be used on areas that canwithstand pressure from this nozzle.
40°nozzle (White):This nozzle delivers a 40 degree spray pattern and a lesspowerful stream ofwater. It covers a wide area of cleaning. This nozzle shouldbe used for most general cleaning jobs.
Low pressure nozzle (Black): This nozzle is used to apply chemicals orcleaning solutions. It has the least power stream.
Connect your own home/garden hose
（If your own home/garden hoses do not have metal bolts attached,
please ignore step 1.）
Step 1: Remove the metal bolt at the end of the hose.
Step 2: Connect the hose to the quick connector.
Step 3: Connect the hose connecting the quick connector to the outlet
of the pump.
CAUTION
Inlet water temperature must not exceed 40 C and 20PSI .
Please try to use water with less impurities.If there are too many impurities in the water, the water inlet will be blocked
and the water supply will be insufficient. If the water supply is less than the water output of the pump, the pressure of
the item will drop significantly.
If at any time the flow rate stutters or is inconsistent, release the trigger and switch OFF the machine.Squeeze the
trigger to relieve any pressure and check the jet in the end of the lance for any blockage.If a blockage is suspected
use some wire to clean the inside of the nozzle
The pump is oiled before the product leaves the factory, so you do not need to add extra oil to the pump.If you are
running low or low on oil during use, you need to add 15W30 or 15W40 oil.What you need to pay attention to is that
the volume of oil added is 80ml to 100ml, adding over-full oil will damage the oil seal of the pump.